Current topics

Always up-to-date

Find out about events and company news, browse through our press releases, and learn more about our innovations.

Reifenhäuser Reicofil Launches New Line Generation RF5.

Press Releases

Geneva, April 4, 2017 | At Index 2017 in Geneva machine supplier Reifenhäuser Reicofil presents to the market after more than 15 years of
RF4 its new line generation for the production of spunbond, meltblown and composite nonwovens to set new standards in terms of quality, output, uptime, efficiency and machine intelligence: RF5. Both spunbond technology and meltblown technology have been newly developed for the RF5 platform and complemented by an additional technology for the first time: with RF5 Reicofil ventures into the world of digitalization and paves the way for intelligent machines and an intelligent production.

Markus Müller, Sales Director at Reicofil says: “Venturing into the market with a new technology after 15 successful years is always an exciting moment. For me personally the launch of RF5 is especially exciting because we are making a big step forward with the new performance data and the new and fascinating possibilities that arise from digitalization. RF5 enables our customers to produce nonwovens on the next quality - and productivity level. And the best is: even customers with existing Reicofil lines will have the possibility to benefit from some of the new advantages. We are developing amazing upgrades for RF3 and RF4 lines.“

One of the highlights of RF5 is the significant reduction of failures within the nonwoven. When running standard raw materials hard pieces will be reduced by up to 90 percent in comparison to RF4 technology. By this Reicofil provides a solution for one of the major issues of contamination that exists in the industry. Producers running an RF4 line will be able to make use of this advantage by upgrading the line to RF4.5.

RF5 Technology also fulfills the market demand for finer and finer filaments: the technology can produce up to 20 percent smaller fiber diameters. Thereby titers lower than one denier are producible for the first time. Compared to the RF4s technology the same titers can be achieved with higher outputs or finer titers are feasible with the same outputs, but can provide for better uniformity, strength and softness. 

In terms of productivity the RF5 technology also raises the bar significantly: the output increases by up to 35 percent – to up to 270 kg/h per meter beam width for spunbond and to up to 70 kg/h per meter beam for meltblown. So, producers can run their lines at maximum speed even for higher grammages. 

The meltblown technology benefits from the increased output by a much wider process window, which raises the flexibility. Producers can decide now depending on their requirements whether to use the maximum output capacity and increase productivity by up to 35 percent, or to produce 20 percent higher meltblown quality at the present throughput levels. Of course, also a combination of a slightly higher throughput and a moderate quality increase is possible. 

Looking at the line speed the new RF5 technology reaches the new peak value of 1200 meter per minute. As this value is the actual speed on the conveyor belt and not, as before, the speed at the winder, it can be fully utilized in production. Effectively producers can run their lines 30 percent faster than they could on RF4 lines. 

When it comes to energy efficiency Reicofil lives up to its own claim of reducing the specific energy consumption with every new line generation. For the production of composite nonwovens RF5 saves up to 15 percent compared to RF4.

To further optimize the uptime, which had already reached a very high level with RF4 technology, Reicofil took another close look at maintenance time: Quench chambers and secondary air gaps can now be cleaned much faster. The result is decreased downtimes and increased productivity. In addition many of the new digital solutions have a positive effect on the uptime.

Jens Mager, responsible for digitalization at Reicofil says: „With digitalization we strengthen all the existing advantages of the Reicofil technology such as quality, productivity and reliability. In the future our lines will become an expert on themselves and will guide customers much more than today through the production process. Our solution will help customers to avoid both process failures and human mistakes, it will help to identify and exploit unused potential, to raise reproducibility and to find the best possible machine set-up for high quality and productivity.”

Reicofil developed solutions for more intuitive operation, continuous process and quality monitoring, predictive maintenance, and detection of anomalies. For example, the line will provide its operators with productivity analyses, predicts when a wear part is going to fail, warns the operator of drip formation before it occurs, and provides information to help solve the problem.

Jens Mager adds: „First solutions with great customer benefits are already developed. But digitalization still has huge potentials for innovation that we want to exploit together with our customers. We can react to individual requirements and problems now. That is a huge advantage of digitalization.”

RF5 technology can be ordered from now on in line widths up to 5,2 meter and a lot of different configurations. The Reicofil sales team will provide information on prices and delivery times in individual conversations with customers.

Your contact


Desiree Aringhoff

Human Resources

+49 2241 23510-169 desiree.aringhoff@reife...


Tanja Kühn-Söndgen

Public Relations

+49 2241 23510-480 tanja.kuehn-soendgen@re...

Product Request

Reifenhäuser Gruppe Vertrieb
02241 23510-0


Einkauf Reifenhäuser Gruppe
+49 2241 23510-0 purchasing@reifenhauser...

LCC Reifenhäuser

Pokrovsky Boulevard, 14/6-8
109028 Moscow

P +7 495 956 75 77
P +7 495 917 54 55
F +7 495 956 47 02

Reifenhauser Incorporated

12260 W 53rd Street North
Maize KS 67101

P +1 316 260-2122
F +1 316 260-8033

Reifenhauser Plastic Machinery (Suzhou) Co. Ltd.

BLD. 8, No.2 Ousheng Road, Pingwang Town, Wujiang District, Suzhou
Post Code: 215221

P +86 512 65686036
F +86 512 65686031

Reifenhauser S.r.l.

Via Trentacoste 9
20134 Milano

P +39 02 2150054

Reifenhäuser (India)
Marketing Ltd.

229, Udyog Bhavan
Sonawala Road, Goregaon (East)
Mumbai 400 063

P +91 22 2686 2711
F +91 22 2686 2722

Reifenhäuser GmbH & Co. KG

Manila Office
Lot 17, Block 56, Francisco Reyes St.
Garden Abelardo Homes, BF Homes
Paranaque City 1718

P +63 24033395

Reifenhäuser Latina SpA

Miguel Claro 195, Of. 207
Providencia Santiago,

P +56 2 25847292

Reifenhäuser Private Ltd.

Ho Chi Minh City Office
9th Fl., Maritime Bank Tower
180 - 192 Nguyen Cong Tru
Nguyen Thai Binh Ward Dist.1
Ho Chi Minh City

P +84 8 62879137
F +84 8 62884691

Reifenhäuser Private Ltd.

Asian Pacific Headquarter
25 International Business Park
#04-72 German Centre
Singapore 609916

P +65 65628740
F +65 65636136

Reiloy Metall GmbH

Istanbul Office
Atakent Mah – 243 Sok,
TEMA Istanbul
6/B Daire 31
34307 – kücükcekmece – Istanbul

Reiloy USA Corp.

12260 W 53rd Street North
Maize, KS67101

P +1 800 247 1144
P +1 316 721 1144
F +1 316 721 1495


Tanja Kühn-Söndgen

Public Relations

+49 2241 23510-480 tanja.kuehn-soendgen@reife...